3 WAY SWITCH WITH DIMMER PDF

Magnetic Low Voltage: Used for 12V and 24V light bulbs using a magnetic low-voltage transformer to step down the voltage. Other types of 3-way dimmer switches include:Įlectronic Low Voltage: Used for 12V and 24V light bulbs using an electronic low-voltage transformer to step down the voltage.

Using LED lights with an incompatible incandescent/halogen or fluorescent dimmer may cause humming, incomplete dimming, a shortened lifespan, or other performance problems.

3 WAY SWITCH WITH DIMMER PDF

When switching to LED, if buying from, you can check the dimmer compatibility PDF on each LED light bulb product page to make sure you won’t run into any problems. If you already have your lights on a circuit with a dimmer, new LED lights may not be compatible with an older dimmer. Types of 3-Way Dimmer Switchesĭifferent technology is needed to dim LED light bulbs than fluorescent or incandescent and halogen lights. Use the on-off toggle switch or push button that is part of the dimmer switch instead so that you don’t render the other switches useless. For this reason, you don’t want to dim the lights to off. The other light switches turn the lights off and on to the level set by the dimmer. In this setup, the light level is controlled from a single location, whichever light switch you replace with the dimmer switch. The other switches (you can have more than one) must be on-off switches only. When using a 3-way dimmer switch, you should only have one dimmer on the circuit. If you’re replacing two 3-way light switches at the top and bottom of a stairwell or at either end of a hallway, you might think you need two 3-way dimmer switches, but you actually only need one. Whether you need a 3-way dimmer switch or one compatible with multiple locations depends on how much control you want over light levels and from how many locations. I went back today and bought a new dimmer switch and 40W bulbs this time to see if that would make any difference.If your lights are controlled from more than one switch, a single pole dimmer switch just won’t do.

I am a bit puzzled as I installed the same dimmer for the stairwell light and I don't get any buzzing from the existing switches or dimmer. Everything worked again like it was supposed to and you did not hear any buzzing coming from the switches. I removed the dimmer, obviously, and reinstalled the existing switch back. My only thought at that point was did I have the travelers on opposite locations between the two switches? It didn't make sense that it would pop though. Turned out breaker to have it pop and burn up the dimmer switch completely. Wiring looked standard and easy to wire up. I reinstalled the existing 3-way paddle switch in the single location and then installed the dimmer at the two switch location. My next step was to move the dimmer switch instead to the other location next to the kitchen light switch to see if that did anything for the humming. The switches worked correctly however, when the light was on you could noticeably hear humming coming from the existing switch for the 3-way. I replaced the current bulbs with 60W ecosmart dimmable bulbs. Yesterday, I removed the existing 3-way standalone switch and replaced it with a Lutron Diva dimmer switch for 3-way circuit. The light is control by a 3-way circuit one switch is stand alone on one wall and the other switch is in a box with another switch that controls the kitchen lighting in the other room. In turn, the wife wanted to add a dimmer to the circuit to control the lighting. We recently upgraded our dining room light fixture, which now has 8 light bulb sockets.

3 way switch with dimmer